Linksys wireless adapter validating identity radioactive dating for kids

A BIG disadvantage - the IE version that 98 and 98SE comes with is useless (4.x in 98's case; 5.x in 98SE's case) on the internet now.

You need to install at least IE 6, then the IE 6 SP2 updates, but even with that there are a lot of web pages that no longer work or no longer work well (long delays loading script) in IE 6 SP2.

An advantage - I haven't needed to install any anti-malware software on it for about 2 years - the recent malware isn't targetting ME and older operating systems anymore.

linksys wireless adapter validating identity-17linksys wireless adapter validating identity-14

And that pretty much leaves me back at the original problem… I’ve got the latest driver and utility software loaded for this Netgear MA521 Wireless PC card. If you load drivers from the web, brand name system builders and mboard makers often DO NOT have the main chipset drivers listed in the downloads for your model - in that case you must go to the maker of the main chipset's web site, get the drivers, and load them.

The networks in the neighborhood are detected, including mine, however when pinging packets are sent out but not received. The main chipset "drivers" include info that tells windows how the main chipset supports video.

But you both gave me some more direction and options.

I'm definitely going to attempt getting Win98 back on it to start with and then go from there.

Does Dell have the Win 98SE main chipset drivers on their web site in the downloads for your model ? If they don't, as I recall, the 440BX main chipset drivers are NOT built into 98SE.

If that's the case, you need to get the LAPTOP version of the 440BX drivers from the Intel web site and install them.You can software partition (using FAT for partitions max 2gb, or, usually, FAT32 ) each partition with Fdisk - , the first one must be vmade Active, if it isn't made that way automatically. The only problem is that the display is only 2/3 of the screen and that’s after loading up the video driver from Dell’s support site. "The only problem is that the display is only 2/3 of the screen and that’s after loading up the video driver from Dell’s support site."Whenever you load Windows from a regular Windows CD (or DVD) from scratch, after Setup is finished you must load the drivers for the mboard, particularly the main chipset drivers, in order for Windows to have the proper drivers for and information about your mboard hardware, including it's AGP or PCI-E, ACPI, USB 2.0 if it has it, and hard drive controller support.I saw somewhere that someone updated the monitor driver, too, but haven’t been able to find one yet. If you have a generic system and have the CD that came with the mboard, all the necessary drivers are on it.Unofficial support for Configuration and Toubleshooting of Linksys Devices with latest updates.This blog is not associated with Linksys in any means.Then I discovered that I couldn’t get the laptop to boot up from a CD and when I went into BIOS to reset the boot up priorities I found that the option area for that wasn’t highlighted allowing me to change the line up. You can't install XP on one system then swap the HDD into another & expect it to boot. I'll see if I can figure out how to get 98 back on it! Thanks for your clarity, Larry, sure gives me the direction to go in! If you're going to install XP, you should install the max ram you can install - 256mb. That should work for booting from the XP CD or any bootable CD because it's for the exact same model.

Tags: , ,